Delivery Settings

With an Email delivery policy you can more finely tune how many customers are notified when a product is restocked based on the inventory level and under what conditions they will send.

Available Settings:

Minimum Inventory Quantity
Delivery Window
Delivery Policy
FAQ

You can access these settings from the Back in Stock dashboard.

Under Customize(1) on the left hand side menu

Then Delivery Settings(2)

Account delivery settings

You may wish to only notify customers when you have a minimum quantity of inventory available. The default of 1 will send customer notifications when a product has 1 unit or more in stock while a higher value requires more units. For example, a busy store may set a minimum quantity of five to send. Customers will only be sent a Back in Stock notification if there are five units (or more) of inventory.

From the Delivery settings menu at the top, you can enable and disable all Delivery(1)

Or configure the Minimum quantity to send(2) before customer notifications will send;

For example, a busy store may set a minimum quantity of five to send. Customers will only be sent a Back in Stock notification if there are five units (or more) of inventory.

Notification Delivery Window

A delivery window restricts the time period when your notifications to customers get delivered. A common use for this feature is to prevent SMS messages from delivering at inconvenient hours for your customers.

Access the Delivery Window settings from the left navigation: Customize > Campaigns > Delivery Settings.

The configuration options allow you to set whether a delivery window is enabled, the delivery times in your shop's time zone, and which notification channels use the delivery window. Remember to click "Save delivery settings" at the bottom of the screen after you make adjustments.

Delivery policy settings

Setting a Delivery Policy lets you control how many customers are notified at a time;

Notification rate(1): You can choose to notify a greater or fewer number of customers than the quantity of inventory you have available. For example, setting a notification rate of 1.5 would notify 120 customers when 80 units of inventory is available (80 × 1.5 = 120).

Notification order(2): The Notification order allows you to choose what order to work through the notification list. You can choose to notify either customers who have been waiting the longest by choosing Oldest notifications first or notify the most recent customers by choosing Newest notifications first.

Delivery interval(3): Setting the delivery interval lets you control how quickly the next batch of customer notifications is sent.

Multiple units(4): Only applies if your account uses the Quantity required field. With this option enabled customer notifications will only be sent if enough stock is available to fulfill a customers desired quantity. For example, if a customer has requested a notification and entered the required quantity as 4, that customer will only be notified once 4 units are available. Note that the calculation is not cumulative: if two customers have requested 4 units of a product, and six units becomes available, both customers will be notified. If you don't use the Quantity required field this setting has no effect.

You can disable the Delivery Policy by unchecking the Enabled checkbox and clicking the button labelled Save Policy Settings. Your settings will be preserved, so you can always enable the Delivery Policy again later.

For popular items you can easily end up with a lot of customer notifications. You may even have several times the quantity of inventory being replenished. With a Delivery Policy enabled you can restrict the number of customers being notified at once.

Example: A very popular product

For example, you might have 1000 customer notifications registered for a Medium Green Jacket. You are only able to source 80 units of this jacket from your supplier. If you notify all 1000 customers at once your jacket will sell out but many customers will miss out on purchasing. Enabling a Delivery Policy restricts the number of customers notified based on the quantity of inventory available.

With a Delivery Policy enabled, and the notification rate set to 1, the first 80 customers will be notified. If half of these customers then purchase the Medium Green Jacket your store will have 40 units left in stock. In the next hour another 40 customers will be notified. This will continue until all customers have been notified, or the Medium Green Jacket has sold out again (time to order more stock!)

A note on fractional rates

When using a fractional delivery rate (such as 0.25) the number of notifications to send will be rounded to the nearest whole number. For example, a rate set to 0.25 with 30 units in stock would send 8 customer notifications (30 x 0.25 = 7.5 and then rounded up to 8). If number of notification to send is between zero and one it is always rounded up to one (for example: 0.25 x 1 = 0.25 but rounded up to 1).

FAQ

Disable all email delivery

There might be situations where you want to temporarily disable customer notifications being delivered.

Delivery can be disabled from the Delivery Settings menu as shown above, but also under the Workflow for sending notifications; To disable delivery from the Back in Stock dashboard go to Customize(1), this will then automatically select the Campaigns and Workflow menu, you can then disable Delivery(2) by switching the button to the off position.

.When you do enable delivery again Back in Stock will send customer notifications that are in stock at that time.

To disable delivery for a single product rather than all products please see Pause customer notification delivery for a specific product

Can customer notifications be moved to a different product?

Yes, if you've introduced a new product that replaces an existing item we can arrange to move unsent customer notifications from the old product variant to the new product variant. Customers will then be notified when the new product variant is restocked.

To request this please contact [email protected] with the SKU code (or name) of the both the discontinued product variant and the product variant it is being replaced by.

How long does it take to send an email?

Generally within 60 seconds; but your stock levels are updated through webhook notifications from Shopify. Sometimes webhooks can be delayed, or not arrive at all. To allow for this an hourly update is performed on all recently modified products. As a rule, you can expect your customer to receive an notification email within 60 minutes of updating your product inventory.

Will renaming or updating a product prevent customer notifications being sent?

If you simply update a product, such as renaming it, or updating the description or photos, that will be fine. Back in Stock tracks products in the catalogue using the internal Shopify id. This won't change if you simply update a product.

If you were to remove and re-create a variant, or remove and re-create a an entire product, this would generate a new id and we'd need to sync things up at this end.

Note that some tools, such as doing a CSV import to update products, can result in variant be removed and re-recreated on a product. When this happens Shopify assigns a new id to the variant. Back in Stock then can no longer track the updated variant. If this happens just email [email protected] with the name of the products affected and we can sync them up for you.

How can I remove/archive a discontinued product?

If a product is discontinued (and you will not be restocking it) then you don't have to do anything. You can leave the product in your Back in Stock account. Since it's no longer available to purchase the customer notifications will not be sent.

If you would like to remove the product from your Back in Stock dashboard (for example, you don't want to see it in your reports anymore) it can be archived using the Products report:

From the Back in Stock dashboard, go to the Products(1) menu on the left hand side.

From here you can press the tick box(2) next to the variant you want to archive, then press Archive selected variants(3) on the right hand side.

This will archive the product and the customer notifications attached to it. (You should be sure you won't be restocking a product before you do this.)

Will customer notifications be sent for products set to 'Don't track inventory'?

Customer notifications are sent when a product (or the product variant) has at least one unit in stock, and is published on your store.

Note: If your products are set to Shopify tracks this product's inventory you do not need to follow the process below.

Some stores use the Shopify setting Don't track inventory for products that are in stock. You can still have customer notifications sent for these products by ensuring the inventory quantity is set above '1' before setting Don't track inventory.

From your Shopify store admin, open the Product list and choose the product you wish to set as in stock.

The Track quantity(1) option will be under the products inventory settings.

Make sure the available inventory(2) is above 1 before disabling the quantity tracking.

Even though the inventory quantity field is now hidden the quantity is preserved, and Back in Stock will treat the product as in stock, and start notifying customers.